I see your concern re the water and the plywood- it apparently isn’t a prob- marine plywood well painted- its more than ten years old and shows no sogginess. One bolt, about three inches long, 3/8″ diam holds the entire thing in place (near the top of the pipe). I’m sure it wouldn’t go anywhere if the boat rolled over- I place a towel on the sole, undo the bolt and lift ( with one hand), the entire apparatus out ( must stop half way and disconnect the 1 1/2″ exhaust hose). I set the apparatus on the towel and can check voltages, repair pump etc.
The whole apparatus is about the size and shape of an upright vacuum cleaner.
The shower sump is way aft of this- just forward of the v-drive
Jon
Original Message —-
<.. snip>
Post generated from Pearson424 Forum using Mail2Forum