- This topic has 2 replies, 2 voices, and was last updated 18 years, 6 months ago by
.
-
Posts
-
-
“am going to remove the sump (or move it to under the shower)
Bob’s comments reminded me to ask if anyone knows how to access the drain
hose coming from the shower stall. I am also changing my shower sump and
noticed the 30 year old hose is pretty stiff and should be changed.I haven’t seen any way to get to the drain fitting from underneath. Does the
fitting on the drain have a retaining nut underneath or was it just put in
with bedding compound and can be removed from inside the shower stall.Paul
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
I was able to remove the hose from the shower drain fitting by lying on my back, head aft,reaching laterally to starboard through the hatch, and using the braille method with a nut driver (rather than a screwdriver) to remove the hose clamp. I left the old hose in place(multiple electrical ties almost impossible to reach) and ran a new hose to the shower sump (which is forward of the V-drive)
Good thing -because several small screws had been trapped in the drain and in conjunction with hair had essentially blocked the drain>
Jon
Original Message —-
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
-
- You must be logged in to reply to this topic.