×

Dinghy on Deck

Home / Topic / Dinghy on Deck

Forums › General Discussion › Dinghy on Deck

Viewing 4 reply threads
  • Author
    Posts
    • May 16, 2008 at 9:36 pm #67001
      Hull152_Patrick
      Spectator

      This is probably a FAQ, but I didn’t find anything in the forum.

      A tender is one of the things on my early needs list. I know I want a RIB and I want to mount it on deck during passages. I’m assuming best place for this is on the cabin top under the boom as opposed to forward of the boom.

      If you’re doing the same what Size/Make/Model do you have.
      Even better if you can share a photo of how you’re lashing it down.

      Thanks,
      -p

      Owners no more...
      Thanks Dawn and Patrick!

    • May 17, 2008 at 12:27 am #69904
      john stevenson
      Participant

      Patrick,
      I store my RIB on deck, forward of the mast for several reasons.

      1. A 9' dinghy fits perfectly between the mast and the forward end of the cabin trunck.
      2. It is convenient to launch and retrieve with the spinnaker halyard, the staysail harlyard or the spare jib halyard.
      3. It is a rain shield for the forward cabin hatch, allow it to be open is all but the strongest squalls.
      4. When the forward portion of the dinghy is raised via a halyard it acts as a wind scoop for the forward hatch.
      5. I can leave it fully or partially inflated on day passages.
      6. It is the most convenient place from which to launch and retrieve the dinghy

      The reasons I would not put it aft of the mast.

      1. It would block ventilation and light from the saloon hatch over the dining table
      2. I already placed my life raft under the boom.

      I secure the dinghy with straps to the hand rails on the coach roof. This has worked well for 2 trans-Atlantic sails.

      There are pictures in various places on my website, particularly under the Sailing/Atlantic Circle pages.

      John

      On Fri, May 16, 2008 at 5:36 PM, Patrick_Seattle < ([email][/email])> wrote:

      This is probably a FAQ, but I didn't find anything in the forum.

      A tender is one of the things on my early needs list. I know I want a RIB and I want to mount it on deck during passages. I'm assuming best place for this is on the cabin top under the boom as opposed to forward of the boom.

      If you're doing the same what Size/Make/Model do you have.
      Even better if you can share a photo of how you're lashing it down.

      Thanks,
      -p

      Deep Playa, #152 http://www.DeepPlaya.com
      Patrick's Sailing Blog: http://shipsrecord.com/blogs/patrick

      —
      Regards,
      John Stevenson
      http://www.svsarah.com

      Post generated from Pearson424 Forum using Mail2Forum

    • May 17, 2008 at 6:42 am #69905
      Hull152_Patrick
      Spectator

      John, I’m beginning to think maybe I should my questions to you then send the answers to the list for archival. 😉 This is EXACTLY the kind of thoughtful information from someone who’s been there, done that, sent the postcard that a new owner needs.

      Thanks a lot for the reply!
      -p

      s/v Deep Playa – Pearson 424 #152
      http://www.DeepPlaya.com

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

      Owners no more...
      Thanks Dawn and Patrick!

    • May 17, 2008 at 11:49 pm #69909
      Anonymous

      We sail on long passages with the 10 ft.RIB forward of the mast. We are cutter rigged. Jim #219

      — wrote:

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • May 18, 2008 at 1:14 am #69911
      RLeeds
      Participant

      How do you get it aboard? Spin halyard, genny haly’d?
      Rodd #214

      Original Message

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.