Forums › General Discussion › clean water tanks
- This topic has 1 reply, 2 voices, and was last updated 17 years, 11 months ago by
sumocean.
-
AuthorPosts
-
-
November 7, 2008 at 1:27 pm #67232
Tor
ParticipantLinus,
After this initial purge the tanks should stay fairly clean while you’re using & refilling the water regularly. An occasional bleach shock treatment inside the tanks – I use a bleach/water mix in a small spray bottle to reach up to the higher sections – followed by a very thorough rinse before refilling, is a good habit to develop. Most of all, if/when you store the boat or just leave her for long periods, empty and towel-dry the tanks. Ideally, leave the inspection ports open during storage, too. It was surely long-term sitting water that fouled your tanks and mine.
Tor
~~~~~~~~~~~~~~~~~~~~~~~
Silver Heels, P-424 #17
http://www.SilverHeels.us
~~~~~~~~~~~~~~~~~~Quote:
Original Message
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
November 7, 2008 at 3:01 pm #71011
sumocean
ParticipantTor
Good habiits are not one of my strong points, but after the boss saw the inside of the tanks I think she will give some xtra help in remembering your ideas. Let me know when you are headed north. It would be great to meet you in person.
Linus
—- Silver Heels wrote:Quote:Linus,After this initial purge the tanks should stay fairly clean while you’re using & refilling the water regularly. An occasional bleach shock treatment inside the tanks – I use a bleach/water mix in a small spray bottle to reach up to the higher sections – followed by a very thorough rinse before refilling, is a good habit to develop. Most of all, if/when you store the boat or just leave her for long periods, empty and towel-dry the tanks. Ideally, leave the inspection ports open during storage, too. It was surely long-term sitting water that fouled your tanks and mine.
Tor
~~~~~~~~~~~~~~~~~~~~~~~
Silver Heels, P-424 #17
http://www.SilverHeels.us
~~~~~~~~~~~~~~~~~~Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
-
AuthorPosts
- You must be logged in to reply to this topic.