Forums › General Discussion › LED Anchor light

Viewing 6 reply threads
  • Author
    Posts
    • #67891
      RLeeds
      Participant

      Was there someone in our group who is involved with a company that is making LED nav lights? I am planning on a new anchor light and I think I remember reading that one of our members makes them???

      Thanks!

      Rodd Leeds
      Windseeker, #214

      Post generated from Pearson424 Forum using Mail2Forum

    • #74793
      madsailor
      Moderator

      Hi Rodd,

      Pete Dubler of SCADtech is involved with that – I was hoping to use his lights but they weren't available before I left.  I can offer this, though.  If you have a standard anchor light fitting, Dr. LED has a bulb for it – that's what I used and they seem to work just fine in the fitting you have (especially if it's Aqua Signal).

      It's visible for the required three miles for a vessel our size.

      I still hope Pete gets his new lights out because I want to replace my spreader lights with LEDs and his promise to be quite reasonable and bright.

      Bob

      –
      Bob Fine
      s/v Pelican
      Pearson 424 Hull #8
      http://thesailinglife.blogspot.com
      Follow me at: http://www.tinyurl.com/WhereIsBobFine

      Post generated from Pearson424 Forum using Mail2Forum

    • #74794
      petedd
      Participant

      SCADtech was working on a set of LED nav lights, but they never came to market (yet).

      Pete

      On 1/14/2010 6:23 AM, Rodd Leeds wrote:

      Was there someone in our group who is involved with a company that is making LED nav lights?  I am planning on a new anchor light and I think I remember reading that one of our members makes them???
       
      Thanks!
       
      Rodd Leeds
      Windseeker, #214

      _______________________________________________
      maillist mailing list
      ()
      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      Post generated from Pearson424 Forum using Mail2Forum

    • #74795
      RichCarter
      Participant

      I’ll be retrofiting to LED within the next year or so. Masthead, anchor, and some interior lamps plus possibly the spreader lights. I’m budgeting about $500.

      Rich
      BlackSheep #47


      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #74796
      madsailor
      Moderator

      Rich,

      If you have the Aqua Signal 41s – the size required for our boats, Dr. LED has the lights for them – remember the LED color has to match the lens – you can't put a white LED in a multicolored lens, it will only show through the white part.  Dr. LED has the three color bulbs for the typical tricolor and the dual color bulbs for the two color (and indeed the single color for the single color lenses).

      It should be well less than $500.

      Bob

      On Thu, Jan 14, 2010 at 2:43 PM, < ([email][/email])> wrote:

      Quote:
      I'll be retrofiting to LED within the next year or so.  Masthead, anchor, and some interior lamps plus possibly the spreader lights. I'm budgeting about $500.

      Rich
      BlackSheep #47


      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #74797
      RichCarter
      Participant

      Oh, thanks Bob. I would have never thought to get the right color LEDs. My masthead lamp has a single bulb with a bicolor lense. I read that you have a bicolor bulb, cool!

      Regards
      Rich

      Quote:
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #74798
      madsailor
      Moderator

      Dr. LED makes a tricolor bulb for a masthead light, too, if yours is tricolor. 

      Bob

      On Fri, Jan 15, 2010 at 10:41 PM, Rich Carter < ([email][/email])> wrote:

      Quote:
      Oh, thanks Bob.  I would have never thought to get the right color LEDs.  My masthead lamp has a single bulb with a bicolor lense.  I read that you have a bicolor bulb, cool!
       
      Regards
      Rich

      Quote:
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

Viewing 6 reply threads
  • You must be logged in to reply to this topic.