Forums › General Discussion › bimini & windvane?

Viewing 3 reply threads
  • Author
    Posts
    • #67954
      patn
      Moderator

      This is a question for those folks with biminis and windvanes or biminis
      and no windvanes or the other way around.

      Does it work? Does the windvane see the wind with the binimi? Please
      let us know about your experiences ..

      – pat
      SV Doris E, p424 #178

      _______________________________________________
      maillist mailing list

      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      Post generated from Pearson424 Forum using Mail2Forum

    • #75093
      john stevenson
      Participant

      Pat,
      My Monitor works with a Bimini over the cockpit, and my Bimini is fairly
      high so I (6′ 1″) can stand erect under it. The secret is the Monitor comes
      with a tall vane, which senses the wind above the Bimini. The top of the
      vane is the part that drives the gear. If you get the Bimini designed for
      your height there should be no problem. All bets are off if Dave can stand
      under it :).
      The only air flow problem I’ve had is once when I had furled the mizzen and
      sheeted the boom to leeward. Then we tacked and I forgot to tack the mizzen
      boom. All of a sudden the Monitor wouldn’t steer worth a darn. It was
      night and under the Bimini I wasn’t aware of the mizzen boom being to
      windward of the vane. With daylight I finally figured it out, tacked the
      boom to leeward and the Monitor was its old self again.

      On Sun, Mar 28, 2010 at 3:47 PM, pat noordsij <> wrote:

      This is a question for those folks with biminis and windvanes or biminis
      and no windvanes or the other way around.

      Does it work? Does the windvane see the wind with the binimi? Please let
      us know about your experiences ..

      – pat
      SV Doris E, p424 #178

      _______________________________________________
      maillist mailing list

      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      —
      Regards,
      John Stevenson
      http://www.svsarah.com
      _______________________________________________
      maillist mailing list

      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      Post generated from Pearson424 Forum using Mail2Forum

    • #75096
      Anonymous

      Pat,

      Yes, my Auto-Helm windvane works perfectly behind the dodger and bimini. The
      airvane is mostly above the bimini height so it gets enough clear air. The
      trade-off is I have to remember to put a preventer on the mizzen boom
      whenever I’m using the windvane, to prevent an accidental jibe or
      thoughtless tack from wiping out the airvane.

      Tor
      ~~~~~~~~~~~~~~~~~~~~~~~
      Silver Heels, P-424 #17
      http://www.SilverHeels.us
      ~~~~~~~~~~~~~~~~~~

      Quote:

      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #75097
      Hull152_Patrick
      Spectator

      In my conversations with booth the folks from SelfSteer (Monitor, Sayes,
      etc) and Yves from Capehorn (delightful guy from Quebec) I asked them about
      this and they all said most Cruisers are running off the wind so in general
      the cockpit canvas isn’t really a problem anyway. However when you are going
      to weather they both said the tall fins work well.

      -p

      On Mon, Mar 29, 2010 at 7:48 AM, Silver Heels <> wrote:

      Quote:
      Pat,

      Yes, my Auto-Helm windvane works perfectly behind the dodger and bimini.
      The
      airvane is mostly above the bimini height so it gets enough clear air. The
      trade-off is I have to remember to put a preventer on the mizzen boom
      whenever I’m using the windvane, to prevent an accidental jibe or
      thoughtless tack from wiping out the airvane.

      Tor
      ~~~~~~~~~~~~~~~~~~~~~~~
      Silver Heels, P-424 #17
      http://www.SilverHeels.us
      ~~~~~~~~~~~~~~~~~~

      Quote:

      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

      Owners no more...
      Thanks Dawn and Patrick!

Viewing 3 reply threads
  • You must be logged in to reply to this topic.