You may remember I broke the lug off my main boom end cap for the tack of
the sail. I was going to Magruber something, but found I could get one from
Rig Rite for about $300.

http://www.rigrite.com/Spars/Spartan_Spars/cd4_boom.html
*D-4 Gooseneck Assembly, Special – Pearson: SP-180PY:*
Special Gooseneck End designed especially for some larger Pearson Yachts, is
identical to *SP-180*, above, but with lug for attachment of 5/16″ Tack
shackle. Used with a variety of *Gooseneck
Toggles<http://www.rigrite.com/Spars/SparParts/Gooseneck_toggles.html>
*, up to 15/16″ wide, that do not incorporate a Tack attachment. Heavy-duty
aluminum casting has black epoxy coating and includes 1/2″ horizontal pin
and nylon bearing washers.

I was also looking for replacement outhaul sliders for both the main and the
mizzen. They didn’t have the mizzen and the main was $399 (yikes!) so I
didn’t order that. These are the two parts I identified. Has anyone else
replaced their outhaul sliders with a more affordable part?

http://www.rigrite.com/Spars/SparParts/Outhaul_slides_integral.html
*Main*
*Outhaul Slide Ass’y w/ Sheave for 3/4″ Internal Track: Sch 95-54X:*Heavy-duty
Outhaul Slide Assembly features channel with 2-position clew attachment
using 5/16″ clevis pin, and 1 1/16″ diameter SS Sheave for a 2 part purchase
using up to a 5/32″ wire pennant. When additional purchase is not desired,
sheave can be used for direct attachment of outhaul pennant. Slide body is
cast SS with welded sheave cage and 9/16″ ID channel for Clew. Slide is 3
3/4″ long x 3/4″ wide, and 2 5/8″ (maximum) high. For 3550, 3756 and other
Boom sections with 3/4″ Internal Flat Track.

[image: Sch 95-54X]
*Mizzen*

Outhaul Slide Assembly w/ Sheave for 1/2″ Boltrope Groove: Sch 95-56X:Heavy-duty
Outhaul Slide Assembly features channel with 2-position clew attachment
using 5/16″ clevis pin, and 1 1/16″ diameter delrin Sheave for a 2 part
purchase using up to a 3/8″ rope pennant. Slide body is welded SS with
welded sheave cage, a 9/16″ ID channel for Clew and a heavy delrin liner to
minimize friction. Slide is 3 3/4″ long x 3/4″ wide, and 2 5/8″ (maximum)
high. For Boom sections with a 1/2″ or larger Boltrope groove.

[image: Sch 95-56X]

Thanks,
-p

—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com
_______________________________________________
maillist mailing list

https://pearson424.org/mailman/listinfo/maillist_pearson424.org

Post generated from Pearson424 Forum using Mail2Forum