Pictures:

http://www.dublerfamily.com/Regina_oceani/VangFlange.JPG

http://www.dublerfamily.com/Regina_oceani/VangFlange2.JPG

On 5/14/2011 4:06 PM, Pete Dubler wrote:

Has anyone replaced their cast boom vang mounting flange? This is the
one on the base of the mast just above the deck. Mine is looking
pretty pitted and should probably be replaced while I am refinishing
the mast. Suggestion are appreciated. (I will be mounting a
Garhauer solid vang by the way. It was fitted for the existing flange.

Thanks,

Pete

_______________________________________________
maillist mailing list

https://pearson424.org/mailman/listinfo/maillist_pearson424.org

_______________________________________________
maillist mailing list

https://pearson424.org/mailman/listinfo/maillist_pearson424.org

Post generated from Pearson424 Forum using Mail2Forum

Never seen anything like that part on UNABATED (#140) nor on any other 424 I’ve been on.
mmmm…..
Alan

— On Sat, 5/14/11, Pete Dubler wrote:

Post generated from Pearson424 Forum using Mail2Forum

That’s not a Pearson part. It came wit the vang or it was purchased from a
company that no longer exists. Get a stainless one.

Art

I’m not being terse. This is from my mobile.
On May 14, 2011 6:42 PM, “Alan” wrote:

Never seen anything like that part on UNABATED (#140) nor on any other 424

I’ve been on.

thanks

On 5/14/2011 5:01 PM, Robert Fine wrote:

That’s not a Pearson part. It came wit the vang or it was purchased from a
company that no longer exists. Get a stainless one.

Art

I’m not being terse. This is from my mobile.
On May 14, 2011 6:42 PM, “Alan” wrote:

Never seen anything like that part on UNABATED (#140) nor on any other 424

I’ve been on.

I would look at getting the one Garhauer makes for the bottom of the boom vang
and just attach it to the mast.
Good luck,
Ted Riley
Bel Esprit II
hull #175

________________________________

Post generated from Pearson424 Forum using Mail2Forum