- This topic has 2 replies, 2 voices, and was last updated 13 years, 6 months ago by
.
-
Posts
-
-
This is one that I removed. Under the handle in the front of the picture is the old bonding screw with a bit of wire left on it
On a good day I can see the other side of the river!
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Thanks Linus-
I know about those small bonding screws. I have those on some of my larger
thru hulls, but on the one in question there are large bolts coming up from
the bottom of the seacock, mainly to keep the thru hull from turning. One
of these bolts is my problem child.
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Ok I guess I thought in your original post you were talking about bonding wiring. I just got stuck on that. Sorry at least I got to take picture of a boat part.
Linus
On a good day I can see the other side of the river!
On Apr 5, 2013, at 5:15 PM, Rodd Leeds wrote:
Quote:Thanks Linus-
I know about those small bonding screws. I have those on some of my larger thru hulls, but on the one in question there are large bolts coming up from the bottom of the seacock, mainly to keep the thru hull from turning. One of these bolts is my problem child.
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.