Forums › General Discussion › Re: Pearson Blue Prints

Viewing 28 reply threads
  • Author
    Posts
    • #67265
      Anonymous

      I agree they don’t have a lot of use, but I have found them helpful as a reference. I would be interested in a copy of the orginal wiring plan. There are still a few wires I have not identified and labeled…

      If only a few are interested I will check to see what it will cost to copy and send to anyone copies at cost.

      Cada

      Dec 1, 2008 01:29:39 PM, wrote:

      I have the ketch blueprints and even a wiring diagram which I’ll tell you now is nearly useless.

      Bob

      On Mon, Dec 1, 2008 at 5:59 AM, quent ()> wrote:

      Me too.
      Quent

      —
      Bob Fine
      s/v Pelican
      Hull #8

      Post generated from Pearson424 Forum using Mail2Forum

    • #71187
      RichCarter
      Participant

      Cada
      I’d be interested in PDFs. I have no need for hard copies. As I said earlier, I’d be happy to chip in to have them scanned. Paypal is pretty easy if you accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71189
      rdugger
      Participant

      Cada,
      I and another Pearson 424 owner would be interested in copies..

      Bob,
      We'd also be interested in what you've got…

      Rick Dugger
      Eclipse #73

      On Mon, Dec 1, 2008 at 9:07 AM, < ([email][/email])> wrote:

      I agree they don't have a lot of use, but I have found them helpful as a reference. I would be interested in a copy of the orginal wiring plan. There are still a few wires I have not identified and labeled…

      If only a few are interested I will check to see what it will cost to copy and send to anyone copies at cost.

      Cada

      Dec 1, 2008 01:29:39 PM, () wrote:

      I have the ketch blueprints and even a wiring diagram which I'll tell you now is nearly useless.

      Bob

      On Mon, Dec 1, 2008 at 5:59 AM, quent ()> wrote:

      Me too.
      Quent

      —
      Bob Fine
      s/v Pelican
      Hull #8


      To unsubscribe, e-mail: () For additional commands, e-mail: ()

      Post generated from Pearson424 Forum using Mail2Forum

    • #71191
      Anonymous

      Cada and Bob,
      I would be interested also and would be happy to chip in on cost. PDF’s would suite my needs if that is easier than hard copies.
      Phil Fontaine
      Aurora – Ketch #94

      Quote:

      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71192
      Anonymous

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, wrote :

      Quote:
      Cada
      I’d be interested in PDFs. I have no need for hard copies. As I said earlier, I’d be happy to chip in to have them scanned. Paypal is pretty easy if you accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71193
      sumocean
      Participant

      My copies are of a ketch layout and I have talked to a friend that said they may scan them for a few beers and wings. Give me till tomorrow and I’ll see if it is true. My copies are folded so I don’t know how well they will copy. Didn’t John have scanned copies on his web page? I thought I had seen the blue prints on someone’s web page.

      Linus

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71194
      Hull152_Patrick
      Spectator

      SV Sarah’s scans:
      blue prints: http://www.svsarah.com/Sarah/ewSarahPlans.htm
      alternator autocad: http://www.svsarah.com/Sarah/ewSarahPlansAutoCAD.htm

      -p


      s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
      Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

      Owners no more...
      Thanks Dawn and Patrick!

    • #71195
      kalinowski
      Participant

      I would also like to get a copy (especially wiring) and would be happy to chip in.

      Dan Kalinowski
      Lady Leanne II (#135)
      Honolulu

    • #71197
      sumocean
      Participant

      Hey Guys

      I just got back from scanning the docking plan, electrical, layout and sail plans for the ketch rig. I expect an email with all in PDF files in 10 minutes or so. I will email them out when they come in.

      Linus

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71198
      Anonymous

      Will you send them to everyone on the list or only those who requested copies? In either event I would like copies.

      Lee

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71199
      sumocean
      Participant

      I have tried to send them and my isp says that they are to large. The smallest is 7.75 mb. Is there an easy way to post them to the web page?

      Linus

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71206
      madsailor
      Moderator

      Hi Linus,

      You are a god! Listen, if you can't post them, then I'll let the list use my ftp site. Let me know.

      Bob

      On Tue, Dec 2, 2008 at 3:46 PM, Linus Martinez < ([email][/email])> wrote:

      Quote:
      I have tried to send them and my isp says that they are to large. The smallest is 7.75 mb. Is there an easy way to post them to the web page?

      Linus

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71207
      Anonymous

      Just found out converting blue prints to pdf is much cheaper than I was orginally told. Plan to convert three drawings, sail plan for sloop, deck layout specifications and interior detailed drawing. Will not be able to do it until after holidays. Will send out, but would hope we could put all of them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, wrote:

      Quote:
      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, wrote :

      Quote:
      Cada
      I’d be interested in PDFs. I have no need for hard copies. As I said earlier, I’d be happy to chip in to have them scanned. Paypal is pretty easy if you accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71208
      patn
      Moderator

      I have the drawing from Linus. I'm looking at the “best” to present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email])> wrote:

      Quote:
      Just found out converting blue prints to pdf is much cheaper than I was orginally told. Plan to convert three drawings, sail plan for sloop, deck layout specifications and interior detailed drawing. Will not be able to do it until after holidays. Will send out, but would hope we could put all of them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, () wrote:

      Quote:
      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, () wrote :

      Quote:
      Cada
      I'd be interested in PDFs. I have no need for hard copies. As I said earlier, I'd be happy to chip in to have them scanned. Paypal is pretty easy if you accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71295
      rdugger
      Participant

      Pat
      Did the drawings make it to the web site?
      I looked but didn't find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email])> wrote:

      Quote:
      I have the drawing from Linus. I'm looking at the “best” to present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email])> wrote:

      Quote:
      Just found out converting blue prints to pdf is much cheaper than I was orginally told. Plan to convert three drawings, sail plan for sloop, deck layout specifications and interior detailed drawing. Will not be able to do it until after holidays. Will send out, but would hope we could put all of them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, () wrote:

      Quote:
      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, () wrote :

      Quote:
      Cada
      I'd be interested in PDFs. I have no need for hard copies. As I said earlier, I'd be happy to chip in to have them scanned. Paypal is pretty easy if you accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71351
      patn
      Moderator

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U shaped
      galley layout)

      Rick Dugger wrote:

      Quote:
      Pat
      Did the drawings make it to the web site?
      I looked but didn’t find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij <
      > wrote:

      I have the drawing from Linus. I’m looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, <
      > wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM,
      wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM,
      wrote :

      Cada
      I’d be interested in PDFs. I have no need for hard
      copies. As I said earlier, I’d be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71352
      john stevenson
      Participant

      Thank you, Pat, Cada and anyone else who was instrumental in getting these blueprints in digital format. I downloaded the sailplan over the WIFI here in the Marsh Harbor anchorage. It took a little while so I think I'll wait till late tonight to try the rest.
      Now i can finally throwaway the paper blueprints before they turn into dust.
      Pat, with your permission, I would like to replace the blue print mosaics on my website with these clean version.

      John

      On Mon, Dec 29, 2008 at 11:53 AM, pat noordsij < ([email][/email])> wrote:

      Quote:
      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i'll see if i can't find the U shaped galley layout)

      Rick Dugger wrote:

      Quote:
      Pat
      Did the drawings make it to the web site?
      I looked but didn't find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email]) > wrote:

      I have the drawing from Linus. I'm looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email]) > wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.
      Cada

      Dec 1, 2008 08:36:49 PM, ()

      wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, ()

      wrote :

      Cada
      I'd be interested in PDFs. I have no need for hard
      copies. As I said earlier, I'd be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message



      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71353
      patn
      Moderator

      Of course you can take them – they are all public domain … right?

      – pat

      John Stevenson wrote:

      Thank you, Pat, Cada and anyone else who was instrumental in getting
      these blueprints in digital format. I downloaded the sailplan over
      the WIFI here in the Marsh Harbor anchorage. It took a little while
      so I think I’ll wait till late tonight to try the rest.
      Now i can finally throwaway the paper blueprints before they turn into
      dust.
      Pat, with your permission, I would like to replace the blue print
      mosaics on my website with these clean version.

      John

      On Mon, Dec 29, 2008 at 11:53 AM, pat noordsij <
      > wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U
      shaped galley layout)

      —
      Regards,
      John Stevenson
      http://www.svsarah.com <http://www.svsarah.com>


      To unsubscribe, e-mail:
      For additional commands, e-mail:

      Post generated from Pearson424 Forum using Mail2Forum

    • #71356
      Anonymous

      I plan to have three drawings put into pdf format next tuesday. They are the sail plan for a sloop, layout of c shaped galley, and the deck hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM, () wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U shaped
      galley layout)

      Rick Dugger wrote:

      Pat
      Did the drawings make it to the web site?
      I looked but didn’t find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email])

      Post generated from Pearson424 Forum using Mail2Forum

    • #71357
      patn
      Moderator

      Please upload them to:
      http://drop.io/pearson424/

      I’ll move them around from there. Need help? let me know.

      – pat

      wrote:

      I plan to have three drawings put into pdf format next tuesday. They
      are the sail plan for a sloop, layout of c shaped galley, and the deck
      hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM,
      wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U
      shaped
      galley layout)

      Rick Dugger wrote:

      Pat
      Did the drawings make it to the web site?
      I looked but didn’t find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij <

      >> wrote:

      I have the drawing from Linus. I’m looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, <

      >> wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM,

      > wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM,

      Quote:
      > wrote :

      Cada
      I’d be interested in PDFs. I have no need for hard
      copies. As I said earlier, I’d be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71358
      Tor
      Participant

      Pat,

      Is there a way to resize the PDF files you posted, once I’ve downloaded them? I’d like to put then on my boat web site, but they are awfully big for that. I only have Acrobat Reader, not Pro.

      Thanks,

      Tor
      ~~~~~~~~~~~~~~~~~~~~~~~
      Silver Heels, P-424 #17
      http://www.SilverHeels.us
      ~~~~~~~~~~~~~~~~~~

      Quote:

      Original Message


      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71372
      Anonymous

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don’t think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with ‘C’ galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, () wrote:

      Please upload them to:
      http://drop.io/pearson424/

      I’ll move them around from there. Need help? let me know.

      – pat

      () wrote:

      I plan to have three drawings put into pdf format next tuesday. They
      are the sail plan for a sloop, layout of c shaped galley, and the deck
      hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM, ()

      Post generated from Pearson424 Forum using Mail2Forum

    • #71373
      patn
      Moderator

      I can break them out. Can you upload the file to
      http://drop.io/pearson424

      – pat

      On Wed, Jan 7, 2009 at 1:45 PM, < ([email][/email])> wrote:

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don't think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with 'C' galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, () wrote:

      Please upload them to:
      http://drop.io/pearson424/

      I'll move them around from there. Need help? let me know.

      – pat

      () wrote:

      I plan to have three drawings put into pdf format next tuesday. They
      are the sail plan for a sloop, layout of c shaped galley, and the deck
      hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM, ()

      ()> wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.phphttps://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i'll see if i can't find the U
      shaped
      galley layout)

      Rick Dugger wrote:

      Pat
      Did the drawings make it to the web site?
      I looked but didn't find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      I have the drawing from Linus. I'm looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, () ()

      ()>

      () () ()>> wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, () ()

      ()>

      () () ()>> wrote :

      Cada
      I'd be interested in PDFs. I have no need for hard
      copies. As I said earlier, I'd be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      Quote:
      Quote:
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71374
      Anonymous

      Will do…

      Cada

      Jan 7, 2009 08:14:45 PM, () wrote:

      I can break them out. Can you upload the file to
      http://drop.io/pearson424

      – pat

      On Wed, Jan 7, 2009 at 1:45 PM, < ([email][/email])> wrote:

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don’t think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with ‘C’ galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, () wrote:

      Please upload them to:
      http://drop.io/pearson424/

      I’ll move them around from there. Need help? let me know.

      – pat

      () wrote:

      I plan to have three drawings put into pdf format next tuesday. They
      are the sail plan for a sloop, layout of c shaped galley, and the deck
      hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM, ()

      ()> wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.phphttps://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U
      shaped
      galley layout)

      Rick Dugger wrote:

      Pat
      Did the drawings make it to the web site?
      I looked but didn’t find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      I have the drawing from Linus. I’m looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, () ()

      ()>

      () () ()>> wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, () ()

      ()>

      () () ()>> wrote :

      Cada
      I’d be interested in PDFs. I have no need for hard
      copies. As I said earlier, I’d be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      Quote:
      Quote:
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71375
      Anonymous

      I think it went up… fine name Boat_plans(1).pdf

      Cada

      Jan 7, 2009 08:14:45 PM, () wrote:

      I can break them out. Can you upload the file to
      http://drop.io/pearson424

      – pat

      On Wed, Jan 7, 2009 at 1:45 PM, < ([email][/email])> wrote:

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don’t think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with ‘C’ galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, () wrote:

      Please upload them to:
      http://drop.io/pearson424/

      I’ll move them around from there. Need help? let me know.

      – pat

      () wrote:

      I plan to have three drawings put into pdf format next tuesday. They
      are the sail plan for a sloop, layout of c shaped galley, and the deck
      hardware and hatch layout. I will need a refresher on how to up load….

      Cada
      Jubilee No. 100

      Dec 29, 2008 04:53:25 PM, ()

      ()> wrote:

      they have now (finally ) made it to the website:
      see: https://www.pearson424.org/uploads/linus.phphttps://www.pearson424.org/uploads/linus.php

      sorry it took so long.

      – pat

      (ps when i get back to the boat – i’ll see if i can’t find the U
      shaped
      galley layout)

      Rick Dugger wrote:

      Pat
      Did the drawings make it to the web site?
      I looked but didn’t find them..
      Rick
      Eclipse#73

      On Thu, Dec 4, 2008 at 8:59 AM, pat noordsij < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      I have the drawing from Linus. I’m looking at the “best” to
      present them. I expect to post them tonight.

      – pat

      On Thu, Dec 4, 2008 at 7:27 AM, < ([email][/email]) ([email][/email])

      ()>

      () () ()>>> wrote:

      Just found out converting blue prints to pdf is much cheaper
      than I was orginally told. Plan to convert three drawings,
      sail plan for sloop, deck layout specifications and interior
      detailed drawing. Will not be able to do it until after
      holidays. Will send out, but would hope we could put all of
      them on the web site for future access.

      Cada

      Dec 1, 2008 08:36:49 PM, () ()

      ()>

      () () ()>> wrote:

      Me too and +1 on paypal 🙂

      On 12/1/08 6:37 AM, () ()

      ()>

      () () ()>> wrote :

      Cada
      I’d be interested in PDFs. I have no need for hard
      copies. As I said earlier, I’d be happy to chip in to
      have them scanned. Paypal is pretty easy if you
      accept it.

      —
      Rich Carter
      BlackSheep #47


      Original message


      Quote:
      Quote:
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • #71481
      Anonymous

      Pat has posted three new blue prints under P424 Info. They are currently label cutter, but are for the sloop. However, the interior layout is for both the ketch and sloop.

      Cada

      Jan 7, 2009 07:45:53 PM, () wrote:

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don’t think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with ‘C’ galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, () wrote:

      > >


      To unsubscribe, e-mail: ()

      >
      For additional commands, e-mail: ()
      >


      To unsubscribe, e-mail: () For
      additional commands, e-mail: ()


      To unsubscribe, e-mail: ()
      For additional commands, e-mail: ()


      To unsubscribe, e-mail: For additional commands, e-mail:

      Post generated from Pearson424 Forum using Mail2Forum

    • #71482
      Anonymous

      Maybe I’m just dense but I don’t see em

      pearson424.org > p424info > brochure pictures & drawings (?) >
      I see cutter c layout but nothing that looks like a blueprint. Am I in the wrong spot?

      On 1/20/09 7:53 PM, wrote :

      Pat has posted three new blue prints under P424 Info. They are currently label cutter, but are for the sloop. However, the interior layout is for both the ketch and sloop.

      Cada

      Jan 7, 2009 07:45:53 PM, wrote:

      Pat,

      I had three blue prints (one twice) scanned – only problem is they put them into a single pdf document 4 pages. How do you want me to handle this. I don’t think I have the means to break them out as three documents with meaningful names.

      Anyone else have a suggestion? The three drawings are the sail plan for earlier sloops, traditional cabin with ‘C’ galley and deck layout.

      Cada
      Jubilee No. 100

      Dec 31, 2008 10:58:10 PM, wrote:

      > >


      To unsubscribe, e-mail:

      >
      For additional commands, e-mail:
      >


      To unsubscribe, e-mail: For
      additional commands, e-mail:


      To unsubscribe, e-mail:
      For additional commands, e-mail:


      To unsubscribe, e-mail: For additional commands, e-mail:


      To unsubscribe, e-mail: For additional commands, e-mail:

      Post generated from Pearson424 Forum using Mail2Forum

    • #71483
      Hull152_Patrick
      Spectator

      https://pearson424.org/info/SailPlanCutter.pdf

      -p



      s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
      Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

      Owners no more...
      Thanks Dawn and Patrick!

    • #71484
      Anonymous

      Thank you.

      On 1/20/09 10:24 PM, Patrick Walters wrote :

      Quote:
      https://pearson424.org/info/SailPlanCutter.pdf

      -p


      s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>
      Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick <http://www.shipsrecord.com/blogs/patrick>
      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

Viewing 28 reply threads
  • You must be logged in to reply to this topic.