Forums › General Discussion › Roller fueling
- This topic has 7 replies, 4 voices, and was last updated 9 years, 4 months ago by
unabated.
-
AuthorPosts
-
-
April 27, 2017 at 6:16 am #223018
unabated
ParticipantI am trying to get a feel for what brand and model of roller furling other 424 owners are using.
Brand and model would be appreciated along with your opinion of it. Would you replace it for something else or buy it again.
Thanks
Alan
Unabated-#140 -
April 30, 2017 at 2:19 pm #223022
typhoontye
ParticipantDon’t know if you saw my previous reply, it appears my mail may not be making it out.
We have the Harken MKIV 2. Came with the boat. Works fine in all kinds of weather we have encountered.
David
Blue Moon -
May 4, 2017 at 10:02 am #223040
Seawater
ParticipantHi Alan!
You have used the Profurl on Madness, though you may not remember much about it.
Its been great. No significant issues in the 16 or so years since I bought the boat. It has seen some hard use in those years as you know. The only issues have been that a set screw that holds the extruded forestay cover/spindle/sail wrap thingy backed out making it impossible to lower the swivel, so I had to go aloft one year at fall layup. One was missing, bought a new (proprietary) set screw, put blue lock tight on all of them and all is well for about a decade now.
it is simple, and the basket is open allowing for easy correction of any override.
It has required NO maintenance. Never had it apart, never lubed the bearings, just fresh water rinses. Period. My rigging guy says that is all it needs.
I wish all my gear was as reliable.
W
-
May 4, 2017 at 11:30 am #223044
Revery
ModeratorWe have the same Harken as David’s on Revery. It came with the boat, looks older than Moses, but works fine. If, when we inspect the rigging soon, we decide it needs to be replaced, I doubt we’d go with Harken. Mostly because if cost, but also because it has an enclosed drum. But that’s not to say it isn’t a great unit…it’s a Harken after all.
Evan
Revery -
June 1, 2017 at 2:12 pm #223169
unabated
Participant -
June 1, 2017 at 2:25 pm #223210
unabated
Participant -
June 1, 2017 at 2:27 pm #223231
typhoontye
Participant -
June 1, 2017 at 2:28 pm #223237
unabated
ParticipantI am trying to get a feel for what brand and model of roller furling other 424 owners are using.
Brand and model would be appreciated along with your opinion of it. Would you replace it for something else or buy it again.
Thanks
Alan
Unabated-#140
-
-
AuthorPosts
- You must be logged in to reply to this topic.




