×

Universal joint replacement part number?

Home / Topic / Universal joint replacement part number?

Forums › General Discussion › Universal joint replacement part number?

Viewing 4 reply threads
  • Author
    Posts
    • May 31, 2008 at 2:12 am #67032
      Chuck Ruble
      Participant

      My universal joint on the upper prop shaft was partially seized. I had the shop press it out and plan to visit NAPA tomorrow to have them ID it using the bearing cap dimensions. Has anybody ever replaced this and recall what the part number was? Looks like something off an F150.

      Chuck

      Post generated from Pearson424 Forum using Mail2Forum

    • May 31, 2008 at 1:24 pm #70039
      quent
      Participant

      Chuck-
      The U-joints that I purchased from Transmission Marine in FL came in boxes from Spicer labeled “5-153X”.
      Remove the oil seals, if any, before installing them. I would be interested in knowing if they are common automotive parts.
      I’m assuming that you still have the original model RV-20 Walter V-drive.
      Do you have the Walter manual?
      Quent

    • May 31, 2008 at 6:48 pm #70040
      RichCarter
      Participant

      Chuck
      This is from my notes. I think the universal joint numbers are in here too.

      Rich

      Original Message

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • June 2, 2008 at 12:15 am #70043
      Chuck Ruble
      Participant

      I am replacing the universal joint that resides just forward of the
      transmission. I’ll have them look up the spicer part number and start
      there. Thanks for the parts list, very useful.

      Chuck

      Original Message

      <.. snip>

      Post generated from Pearson424 Forum using Mail2Forum

    • June 2, 2008 at 12:31 am #70044
      quent
      Participant

      Uh, the Spicer part # I gave you was for the two U-joints internal to the V-drive. I think that you are talking about the one between the drive shaft and the transmission.
      Let us know what the part number is, we have not replaced that part- Yet!
      Quent

  • Author
    Posts
Viewing 4 reply threads
  • You must be logged in to reply to this topic.