- This topic has 9 replies, 4 voices, and was last updated 15 years, 7 months ago by
.
-
Posts
-
-
Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if
you all could look at this part and tell me if this was standard Pearson
or if the PO may have added them. These are on the main mast and I use
to clip on my harness but they could also be used for whisker poles.
There is one on each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
They weren’t standard – they are easily acquired from Forespar or Lewmar or
someone like that. Easy peasy. Look at Defenders.com.Bob
On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler wrote:
Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or if
the PO may have added them. These are on the main mast and I use to clip on
my harness but they could also be used for whisker poles. There is one on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Nothing like this on my mast. Is it aluminum?
Eric Lorentzon
EFI Sales Development Manager
412.352.1941
Sent from my iPhoneOn Mar 7, 2011, at 5:20 PM, Pete Dubler wrote:
Been stripping all the parts off the spars. I promise I have not been cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera screwdrivers, patience)
I did however break flange of one of the large padeyes. I wonder if you all could look at this part and tell me if this was standard Pearson or if the PO may have added them. These are on the main mast and I use to clip on my harness but they could also be used for whisker poles. There is one on each side of the mast. Loop hole ID is 1″.
In any case, I would like to find a replacement. Anyone recognize the maker and know of a source?
Here is the link to the picture: http://www.dublerfamily.com/Regina_oceani/padeye.jpg
Thanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Pete,
This looks like a pad-eye for a whisker pole. Not one my mast, but I have
been planning to add one. My guess Nicro-Fico.On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler wrote:
Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or if
the PO may have added them. These are on the main mast and I use to clip on
my harness but they could also be used for whisker poles. There is one on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
—
Regards,
John Stevenson
http://www.svsarah.com
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Wow, that was fast. I have not seen this particular design in any
catalogs, but have not looked at defender yet. The PO spent a lot of
time on the Med and got a lot of parts there.Pete
On 3/7/2011 5:24 PM, Robert Fine wrote:
They weren’t standard – they are easily acquired from Forespar or Lewmar or
someone like that. Easy peasy. Look at Defenders.com.Bob
On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler wrote:
Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or if
the PO may have added them. These are on the main mast and I use to clip on
my harness but they could also be used for whisker poles. There is one on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Pete,
Bob is probably right – Forespar. I had these on my previous boat for the
whisker pole. I crewed on a friends boat for races and these fittings were
used for the reaching strut.On Mon, Mar 7, 2011 at 7:25 PM, Pete Dubler wrote:
Wow, that was fast. I have not seen this particular design in any
catalogs, but have not looked at defender yet. The PO spent a lot of time
on the Med and got a lot of parts there.Pete
On 3/7/2011 5:24 PM, Robert Fine wrote:
They weren’t standard – they are easily acquired from Forespar or Lewmar
or
someone like that. Easy peasy. Look at Defenders.com.Bob
On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler
wrote:Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or
if
the PO may have added them. These are on the main mast and I use to clip
on
my harness but they could also be used for whisker poles. There is one
on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
—
Regards,
John Stevenson
http://www.svsarah.com
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Unless I’m mistaken, it’s an anodized aluminum pad eye. I prefer stainless
ones, and they come with curved plates. I know I’ve seen yours at least
within the last few years.Bob
On Mon, Mar 7, 2011 at 7:25 PM, Pete Dubler wrote:
Wow, that was fast. I have not seen this particular design in any
catalogs, but have not looked at defender yet. The PO spent a lot of time
on the Med and got a lot of parts there.Pete
On 3/7/2011 5:24 PM, Robert Fine wrote:
They weren’t standard – they are easily acquired from Forespar or Lewmar
or
someone like that. Easy peasy. Look at Defenders.com.Bob
On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler
wrote:Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or
if
the PO may have added them. These are on the main mast and I use to clip
on
my harness but they could also be used for whisker poles. There is one
on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Pete,
I had two of these on my mast and removed them when I was re-doing
things. The looked like original equipment to me. I use the ring on the
pole track slide car for attaching the whisker pole. Pretty sure I’ve
got both fittings in a locker somewhere. Let me know if you need them.Tor
Silverheels, P-424 #17
http://www.silverheels.us
Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Yes, cast.
On 3/7/2011 5:24 PM, S V Navasana wrote:
Nothing like this on my mast. Is it aluminum?
Eric Lorentzon
EFI Sales Development Manager
412.352.1941
Sent from my iPhoneOn Mar 7, 2011, at 5:20 PM, Pete Dubler wrote:
Been stripping all the parts off the spars. I promise I have not been cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera screwdrivers, patience)
I did however break flange of one of the large padeyes. I wonder if you all could look at this part and tell me if this was standard Pearson or if the PO may have added them. These are on the main mast and I use to clip on my harness but they could also be used for whisker poles. There is one on each side of the mast. Loop hole ID is 1″.
In any case, I would like to find a replacement. Anyone recognize the maker and know of a source?
Here is the link to the picture: http://www.dublerfamily.com/Regina_oceani/padeye.jpg
Thanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
I do not think Forespar makes a cast one these days. Only the welded
one made of stainless.On 3/7/2011 5:29 PM, John Stevenson wrote:
Pete,
Bob is probably right – Forespar. I had these on my previous boat for the
whisker pole. I crewed on a friends boat for races and these fittings were
used for the reaching strut.On Mon, Mar 7, 2011 at 7:25 PM, Pete Dubler wrote:
Wow, that was fast. I have not seen this particular design in any
catalogs, but have not looked at defender yet. The PO spent a lot of time
on the Med and got a lot of parts there.Pete
On 3/7/2011 5:24 PM, Robert Fine wrote:
They weren’t standard – they are easily acquired from Forespar or Lewmar
or
someone like that. Easy peasy. Look at Defenders.com.Bob
On Mon, Mar 7, 2011 at 7:20 PM, Pete Dubler
wrote:Been stripping all the parts off the spars. I promise I have not been
cursing. (watch words: Kroil, torch, cobalt bits, heavy duty Wera
screwdrivers, patience)I did however break flange of one of the large padeyes. I wonder if you
all could look at this part and tell me if this was standard Pearson or
if
the PO may have added them. These are on the main mast and I use to clip
on
my harness but they could also be used for whisker poles. There is one
on
each side of the mast. Loop hole ID is 1″.In any case, I would like to find a replacement. Anyone recognize the
maker and know of a source?Here is the link to the picture:
http://www.dublerfamily.com/Regina_oceani/padeye.jpgThanks,
Pete
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.