- This topic has 13 replies, 8 voices, and was last updated 15 years, 4 months ago by
.
-
Posts
-
-
Just curious to find out what the options are for a midship cleat to hold a springline. Has anyone installed a cleat on the bulkwark or is a track cleat the best way to go. My docking situation requires a waist cleat and I wonder about relying on a cleat of the sail track. Did a search before I asked and nothing came up.
-
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko”
wrote:Just curious to find out what the options are for a midship cleat to hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat and I
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Schaefer 70-75 is what I use as well.
http://schaeferhardware.com/detail.aspx?ID=1010-p
—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com | @DeepPlayaOn Sun, Jun 12, 2011 at 6:35 PM, Robert Fine wrote:
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko”
wrote:Just curious to find out what the options are for a midship cleat to hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat and I
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick! -
Don’t let the price scare you. You can get them for much less.
I’m not being terse. This is from my mobile.
On Jun 13, 2011 1:18 AM, “Patrick “Peaboy” Walters”
wrote:Schaefer 70-75 is what I use as well.
http://schaeferhardware.com/detail.aspx?ID=1010-p
—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com | @DeepPlayaOn Sun, Jun 12, 2011 at 6:35 PM, Robert Fine wrote:
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko” <wrote:
Just curious to find out what the options are for a midship cleat to
hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat andI
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
I use 2 of the Schaffer movable cleats on each sail track. One on each end. Gives you a lot of flexibility when moving around and doing different docking situations on frequent basis.
The sail track is certainly mounted well enough to handle it……Although in a TS or hurricane situation….. but then you’d have other issues as well…… but for normal docking… go for it.Alan
— On Sun, 6/12/11, allantereshko wrote:
Post generated from Pearson424 Forum using Mail2Forum
-
-
I also use two per track. Try West Marine with Port Supply if you can.
I’m not being terse. This is from my mobile.
On Jun 13, 2011 7:52 AM, “allantereshko”
wrote:The cheapest I’m finding the 70-75 is Jamestown Dist. for $99. anyone find
a better deal. I like the idea of having one on each end,does create more
options. Thanks Allan #206 Now “Curve of Time”_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
My boat came with a cleat just forward of the gennoa track on the toe-rail. I don’t know if it came from the factory that way or if the first owner installed it. I put a short piece of stainless half-round on the edge of the toe-rail because the lines wear the woodwork. I put a similar piece of half-round for the bow-cleats. There’s nothing special about the cleat. Its the same type and size as the stern cleats. I don’t recommend using a cleat on the track for a boat the size of the 424.
I also put small cleats on three of the stanchions on each side to hang fenders. These work well.
Rich
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Check Garhauer MCS-2 midship cleats. 50.00 on their website.
Eric Lorentzon
EFI Sales Development Manager
412.352.1941
Sent from my iPhoneOn Jun 13, 2011, at 8:49 AM, wrote:
Quote:My boat came with a cleat just forward of the gennoa track on the toe-rail. I don’t know if it came from the factory that way or if the first owner installed it. I put a short piece of stainless half-round on the edge of the toe-rail because the lines wear the woodwork. I put a similar piece of half-round for the bow-cleats. There’s nothing special about the cleat. Its the same type and size as the stern cleats. I don’t recommend using a cleat on the track for a boat the size of the 424.I also put small cleats on three of the stanchions on each side to hang fenders. These work well.
Rich
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
I use the Garhauer track cleats. As with everything Garhauer they are nicely done
On Jun 12, 2011, at 7:35 PM, Robert Fine wrote:
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko”
wrote:Just curious to find out what the options are for a midship cleat to hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat and I
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Garhauers was also well-priced
On Jun 12, 2011, at 11:20 PM, Robert Fine wrote:
Don’t let the price scare you. You can get them for much less.
I’m not being terse. This is from my mobile.
On Jun 13, 2011 1:18 AM, “Patrick “Peaboy” Walters”
wrote:Schaefer 70-75 is what I use as well.
http://schaeferhardware.com/detail.aspx?ID=1010-p
—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com | @DeepPlayaOn Sun, Jun 12, 2011 at 6:35 PM, Robert Fine wrote:
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko” <wrote:
Just curious to find out what the options are for a midship cleat to
hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat andI
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Ditto. I have Garhauer midship cleats. Good value
Sent from my droid….
On Jun 13, 2011 11:28 AM, “Pete” wrote:I use the Garhauer track cleats. As with everything Garhauer they are
nicely done
On Jun 12, 2011, at 7:35 PM, Robert Fine wrote:
I use the Scheafer track cleats about $75 each.
I’m not being terse. This is from my mobile.
On Jun 12, 2011 9:31 PM, “allantereshko” <wrote:
Just curious to find out what the options are for a midship cleat to
hold
a springline. Has anyone installed a cleat on the bulkwark or is a track
cleat the best way to go. My docking situation requires a waist cleat andI
wonder about relying on a cleat of the sail track. Did a search before I
asked and nothing came up._______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
I have used track cleats for 28 years and they work fine. Jim-Revery
— wrote:
Post generated from Pearson424 Forum using Mail2Forum
-
-
- You must be logged in to reply to this topic.