Forums › General Discussion › STEERING STUFFING BOX ACCESS
- This topic has 2 replies, 1 voice, and was last updated 11 years, 4 months ago by
Anonymous.
-
AuthorPosts
-
-
June 19, 2015 at 11:51 am #69085
Anonymous
Start of attached email. Subject: STEERING STUFFING BOX ACCESS
JOE & JOHN – good morning:
When you serviced your leaky rudder shafts, was it necessary to remove the
cross beam thru which the shaft passes and/or the ply platform aft of the
shaft in order to access the stuffing box…or did you hire a midget?~~~ ~ (_~~ (_~ ~ ~ fair winds ~ ~ (_
Capt Bill Tice, aboard s/v CHARISMA
End of attached email
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
June 19, 2015 at 11:58 am #82267
Anonymous
No, Bill, you should be able to get to the stuffing box under that beam. I
found it easy if everything’s out of the aft lazerette and I sit on a
cushion with my legs on one side or the other. It’s not fun, but it is
doable.Bob
On Fri, Jun 19, 2015 at 7:51 AM, Boat1stlady— via maillist <
> wrote:Quote:_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Forwarded message
Post generated from Pearson424 Forum using Mail2Forum
-
June 19, 2015 at 12:35 pm #82270
Anonymous
Bill,
The stuffing box can be serviced (re-packed) under the cross beam. I have
a NL 4.5KVA genset in the lazarette so it is very difficult on Sarah. I
have hire a boatyard muchkin to do the work. My wide body doesn’t fit.Regards,
John Stevenson
http://www.svsarah.com
Sarah’s BlogOn Fri, Jun 19, 2015 at 7:58 AM, Robert Fine via maillist <
> wrote:Quote:No, Bill, you should be able to get to the stuffing box under that beam. I
found it easy if everything’s out of the aft lazerette and I sit on a
cushion with my legs on one side or the other. It’s not fun, but it is
doable.Bob
On Fri, Jun 19, 2015 at 7:51 AM, Boat1stlady— via maillist <
> wrote:Quote:_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Forwarded message
Post generated from Pearson424 Forum using Mail2Forum
-
-
AuthorPosts
- You must be logged in to reply to this topic.