Forums › General Discussion › bleaching teak

Viewing 3 reply threads
  • Author
    Posts
    • #68904
      Tor
      Participant

      I’d like to clean and lighten some of Silverheels’ interior teak, which is dark presumeably with stain. Have any of you done this successfully?

      BTW, I first tried to log into the 424 forum at https://www.pearson424.org/bb2forum to search for this thread, but the page does not load.

      Thanks,

      Tor


      Silverheels, P-424 #17
      http://www.silverheels.us


      _______________________________________________
      maillist mailing list

      https://pearson424.org/mailman/listinfo/maillist_pearson424.org

      Post generated from Pearson424 Forum using Mail2Forum

    • #80928
      Tor
      Participant

      Thanks, Ken. That sounds like something I might find at Ace Hardware.

      I’m giving this old gal a general sprucing up this summer and would love to lighten the very dark teak with which I’ve been living since day one.

      Tor



      Silverheels, P-424 #17

      http://www.silverheels.us


      Post generated from Pearson424 Forum using Mail2Forum

    • #81100
      Miss Kathleen
      Participant

      Hi Tor,

      Just been through the pain of ‘lightening’ the interior teak.

      Only way to get rid of the stain or whatever was used is to apply heat with a heat gun to get the old varnish to bubble away, then scraped and sanded. Took all of 10 weeks of weekends and a few long weekends to get it done.

      A lot of work, but it proved to be worthwhile. One would not believe how much teak there is in a Pearson.

      It was during this period that I had to repair the port bulkhead which resulted in laying up another sheet of veneer on the bulkhead. Once varnished I could not see any difference in colour.

      We used Uroxsys which is a marine aliphatic gloss. It is now sold under International.

      Cheers

      Dennis

    • #81101
      Anonymous

      I’ve got a young sailor working for me part time this
      summer, doing some of the jobs around the boat that I
      just never get to – like cleaning the interior teak.
      That’s not a casual task when you’re living aboard. He
      has worked out a system, though, and one section at a
      time the old teak in here is being scrubbed clean for
      the first time in 36 years. It has never been
      varnished, for which I am grateful, preferring the
      natural wood.

      Once cleaned, the teak lightens up some, but not a lot.
      It’s still stained, not the golden hue I’ve seen in
      natural interiors – more reddish, very like mahogany –
      but freshly oiled it positively glows, accenting the
      grain like fine art. It’s relative darkness is actually
      complimentary now. That’s because from the beginning I
      set out to lighten the depressingly dark interior of
      the boat I bought, then with way too much very dark
      teak, dark cushion fabric and that horrid mustard
      Formica. Years before I had visited the Herreshoff
      Marine Museum in Bristol, Rhode Island and was struck
      by the handsomeness of their boats’ interiors, which
      often featured stained wood trim and parts against
      off-white painted surfaces. It’s a warm but light look,
      comfortable, traditional. That’s what I went for in
      Silverheels. Many of her broad interior surfaces are
      now painted that same off-white, set off by the dark,
      natural wood. And now, with the teak being freshly
      cleaned & oiled, she’s looking very sweet, indeed.
      Nathanael H. would be impressed.

      Tor


      Silverheels, P-424 #17
      http://www.silverheels.us


      Quote:

      Original Message


      Post generated from Pearson424 Forum using Mail2Forum

Viewing 3 reply threads
  • You must be logged in to reply to this topic.