- This topic has 0 replies, 1 voice, and was last updated 11 years, 10 months ago by
.
-
Posts
-
-
For Sale. Teak Frames for NFM SS ports
Author:
Hi All and Happy New Year.
Getting closer to launch time and trying to get rid of some of the ghosts of projects past.
Replaced the old plastic ports with New Found Metals SS ports. Thought I would need the teak trim frames to get them to fit but with short bolts was able to go without. So now I have ten teak frames for NFM 5 X12 SS opening ports. All are sanded, stained and have 8-10 coats of hand rubbed varnish and ready to install. Overall they match the color of the wood paneling in the Pearson closely but due to variations in the pieces of wood used to make the frames some are a bit lighter, some a bit darker.
I had a few older model NFM ports that had the spouts located differently so a few of the teak frames I routed the cutout for the spout a little wider to fit. On one the router grabbed the grain and made a small split but it doesn’t go to the edge and all the modifications are completely hidden under the port frames when installed and do not effect strength, sealing, etc.
NFM $39.95 each plus shipping. I would like $30 each and I’ll pay the shipping if you aren’t in Tierra del Fuego or somewhere too far off.
Pictures available if interested.
Skip
—
Reply Link: <https://www.pearson424.org/tiki/tiki-view_forum_thread.php?forumId=1&comments_parentId=1351#form>_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.