- This topic has 1 reply, 2 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
-
Originally sent to just Alan, but this may have wider interest.
Regards,
John Stevenson
http://www.svsarah.com
Forwarded message
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
John,
It is awful to hear the troubles you have had here. To my recollection
you are not the first to have such problems though with mating up the
velvet drive. This goes to my comment earlier about the exceptional
engineering done by Beta when it came to their bobtail kit for the
Velvet drive. It was as simple as tightening four bolts (actually two
studs and two bolts) and two hose fittings. The bell was the right
length. No shims, no spacers – one piece. And the new damper plate was
included.Hopefully you will be back on the air soon and your wallet also restored.
All the best,
Pete
On 11/15/2011 4:05 PM, John Stevenson wrote:
Quote:Originally sent to just Alan, but this may have wider interest.Regards,
John Stevenson
http://www.svsarah.com
Forwarded message
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.