- This topic has 6 replies, 4 voices, and was last updated 14 years, 11 months ago by
.
-
Posts
-
-
If you’re fabricating in metal: http://www.onlinemetals.com/
Tor
Silverheels, P-424 #17
http://www.silverheels.us <http://www.silverheels.us/>
_______________________________________________
maillist mailing listhttp://server12.websitehostserver.net/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
oh Tor, those folks are so expensive…
On 11/10/2011 2:38 PM, Silverheels wrote:
If you’re fabricating in metal: http://www.onlinemetals.com/
Tor
Silverheels, P-424 #17
http://www.silverheels.us
_______________________________________________
maillist mailing listhttp://server12.websitehostserver.net/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttp://server12.websitehostserver.net/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
So who’s inexpensive?
Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Would like to know that myself. I’ve used online metals for a few odd sizes or small pieces of SS and Al I needed and also a couple of pieces of UHMWPE I used to rebuild my mast step. Maybe not cheap but a good selection and good service.
Have not found a better source for small quantities and certainly looked.
-
My local machine shop guy told me about that site. He uses it for small
orders. I’m sure he’d like to know about a better source, too.Tor
Silverheels, P-424 #17
http://www.silverheels.us
Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Local metal yards generally are pretty reasonable. At mine they have a
new pile of aluminum and of SS scrap every week at $2.00 per pound. I
make stuff out of the stainless and buff it up and it looks great.On 11/10/2011 4:03 PM, Silverheels wrote:
Quote:So who’s inexpensive?Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
I think on Cruisers Forum someone said you can get SS tubing cheaper at
Sailrite, but that is one thing and OnlinMetals has many materials.OM is in Seattle and the best deal was will call and looking in the scrap
bin… can’t do that anymore 😉-p
—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com | @DeepPlayaOn Fri, Nov 11, 2011 at 7:15 AM, Pete Dubler wrote:
Quote:Local metal yards generally are pretty reasonable. At mine they have a
new pile of aluminum and of SS scrap every week at $2.00 per pound. I make
stuff out of the stainless and buff it up and it looks great.On 11/10/2011 4:03 PM, Silverheels wrote:
Quote:So who’s inexpensive?
Original Message
Quote:Post generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick!
-
- You must be logged in to reply to this topic.