inexpensive hose clamps

This topic has 2 replies, 2 voices, and was last updated 18 years ago by Tor.

Viewing 2 reply threads

Author

Posts
- October 4, 2008 at 4:38 pm #67176
  
  Tor
  Participant
  
  Just found a (relatively) inexpensive source of all-stainless hose clamps, if anyone’s interested – less than
  half the Port Supply price: http://www.hardwareandtools.com
  
  Tor
  ~~~~~~~~~~~~~~~~~~~~~~~
  Silver Heels, P-424 #17
  http://www.SilverHeels.us
  ~~~~~~~~~~~~~~~~~~
  
  To unsubscribe, e-mail:
  For additional commands, e-mail:
  
  Post generated from Pearson424 Forum using Mail2Forum
- October 4, 2008 at 8:11 pm #70747
  
  Anonymous
  
  Just because it says all stainless does NOT mean it is good. I have had many “all stainless” clamps go bad. Your better clamps go for around $3 to $5 each.
  Adam
  
  Quote:
  
  <.. snip>
  
  Post generated from Pearson424 Forum using Mail2Forum
- October 4, 2008 at 9:05 pm #70748
  
  Tor
  Participant
  
  I’ve had hose clamps break, too, but you can almost always see it coming if you inspect them closely. Even the cheap ones with ferrous metal screws last many years as long as they’re not immersed in saltwater. Check back with me in a decade or two and I’ll let you know how these held up.
  
  Tor
  ~~~~~~~~~~~~~~~~~~~~~~~
  Silver Heels, P-424 #17
  http://www.SilverHeels.us
  ~~~~~~~~~~~~~~~~~~
  
  Quote:
  
  Original Message
  
  <.. snip>
  
  Post generated from Pearson424 Forum using Mail2Forum
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.