- This topic has 8 replies, 5 voices, and was last updated 12 years, 8 months ago by
.
-
Posts
-
-
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Eh?
On Tue, Feb 25, 2014 at 9:04 AM, Pete Dubler wrote:
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Very strange… let’s try again…
Imagine if you will putting all of the blocks and padeyes from your boat
in a big box for four years and then remembering exactly how each was
mounted while also replacing a bunch of them with new Garhauer
hardware…. I just didn’t take enough pictures first. Now I could
use some advice or pictures on how folks rigged their mizzen sheet near
the gooseneck. Our Bimini is high and the sheet needs to run tighter
in that turn to keep from rubbing holes in the front edge of the Bimini
fabric. Suggestions and pictures greatly appreciated.Pete
On 2/25/2014 9:04 AM, Pete Dubler wrote:
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
I think most of us have put the sheet to the stern rail.
Pardon the brevity. I’m typing this on my phone and I hate typing on my
phone.
On Feb 25, 2014 10:20 AM, “Pete Dubler” wrote:Very strange… let’s try again…
Imagine if you will putting all of the blocks and padeyes from your boat
in a big box for four years and then remembering exactly how each was
mounted while also replacing a bunch of them with new Garhauer hardware….
I just didn’t take enough pictures first. Now I could use some advice
or pictures on how folks rigged their mizzen sheet near the gooseneck.
Our Bimini is high and the sheet needs to run tighter in that turn to keep
from rubbing holes in the front edge of the Bimini fabric. Suggestions
and pictures greatly appreciated.Pete
On 2/25/2014 9:04 AM, Pete Dubler wrote:
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
Mizzen sheet to rail. Mizzen stay sail sheet along boom and down mast.
No pictures.
AlanSent from my iPhone
On Feb 25, 2014, at 10:30 AM, Robert Fine wrote:
I think most of us have put the sheet to the stern rail.
Pardon the brevity. I’m typing this on my phone and I hate typing on my
phone.On Feb 25, 2014 10:20 AM, “Pete Dubler” wrote:
Very strange… let’s try again…
Imagine if you will putting all of the blocks and padeyes from your boat
in a big box for four years and then remembering exactly how each was
mounted while also replacing a bunch of them with new Garhauer hardware….
I just didn’t take enough pictures first. Now I could use some advice
or pictures on how folks rigged their mizzen sheet near the gooseneck.
Our Bimini is high and the sheet needs to run tighter in that turn to keep
from rubbing holes in the front edge of the Bimini fabric. Suggestions
and pictures greatly appreciated.Pete
On 2/25/2014 9:04 AM, Pete Dubler wrote:
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
-
Same here, sheet tackle on the stern rail:
http://www.svsarah.com/Sarah/ewUpgradeDeckRig.htm#Running_Rigging_-_Mizzen_MastActually I have two sets of sheet tackle on the mizzen. When sailing down
wind I move the one tackle to the running backstay padeye, which gives me
an effective vang on the boom. I use the other tackle to control the boom
while I’m moving the other one.Regards,
John Stevenson
http://www.svsarah.comOn Tue, Feb 25, 2014 at 11:08 AM, Silverheels wrote:
Quote:Ditto.Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
I really appreciate the thoroughness and quality of your documentation
John. Thanks!On 2/25/2014 12:40 PM, John Stevenson wrote:
Quote:Same here, sheet tackle on the stern rail:
http://www.svsarah.com/Sarah/ewUpgradeDeckRig.htm#Running_Rigging_-_Mizzen_MastActually I have two sets of sheet tackle on the mizzen. When sailing down
wind I move the one tackle to the running backstay padeye, which gives me
an effective vang on the boom. I use the other tackle to control the boom
while I’m moving the other one.Regards,
John Stevenson
http://www.svsarah.comOn Tue, Feb 25, 2014 at 11:08 AM, Silverheels wrote:
Quote:Ditto.Quote:
Original Message
Post generated from Pearson424 Forum using Mail2Forum
-
Alan, what to you use to turn the mizzen staysail sheet near the
gooseneck so you have the least interference with Bimini? Do you leave
the mizzen staysail sheet rigged on the boom when not using the staysail?Thanks,
Pete
On 2/25/2014 11:03 AM, Alan wrote:
Mizzen sheet to rail. Mizzen stay sail sheet along boom and down mast.
No pictures.
AlanSent from my iPhone
On Feb 25, 2014, at 10:30 AM, Robert Fine wrote:
I think most of us have put the sheet to the stern rail.
Pardon the brevity. I’m typing this on my phone and I hate typing on my
phone.On Feb 25, 2014 10:20 AM, “Pete Dubler” wrote:
Very strange… let’s try again…
Imagine if you will putting all of the blocks and padeyes from your boat
in a big box for four years and then remembering exactly how each was
mounted while also replacing a bunch of them with new Garhauer hardware….
I just didn’t take enough pictures first. Now I could use some advice
or pictures on how folks rigged their mizzen sheet near the gooseneck.
Our Bimini is high and the sheet needs to run tighter in that turn to keep
from rubbing holes in the front edge of the Bimini fabric. Suggestions
and pictures greatly appreciated.Pete
On 2/25/2014 9:04 AM, Pete Dubler wrote:
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
_______________________________________________
maillist mailing listhttps://pearson424.org/mailman/listinfo/maillist_pearson424.org
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.