- This topic has 1 reply, 2 voices, and was last updated 8 years, 6 months ago by
.
-
Posts
-
-
Thanks all for the great response to my previous question about bow reinforcement. Here’s another question for anyone who has replaced port lights with Newfound Metal ones. Our forward 6 have been replaced and we are thinking about also replacing the longer pair on each side, and I am wondering about using the 520 versus 620. The 620 is a little taller than the forward port lights (9 7/16″ versus 8 7/16″), but since the cabin side is also wider in the aft area this might look OK. Has anyone else used the larger size? If so, how does it look?
David
-
May 206 I installed a 6×20 in the aft cabin on the port side as well in the head over the sink. We had previously installed 6 NFM ports in the fwd cabin and saloon. Install of the 6x20s went fine. I have no issues with the way they look. We still have the original large non opening ports in the shower and at the galley on the port side.
Rick
Eclipse #73
-
- You must be logged in to reply to this topic.