- This topic has 2 replies, 1 voice, and was last updated 17 years, 1 month ago by
.
Viewing 2 reply threads
-
Posts
-
-
Has anybody modified the stock Pearson stainless rails to make seats up in the corners like these? http://www.zarcor.com/s2k/Sternperch.html If so I’d sure like to see photos of how the vertical support was done dealing with the propane locker.
Post generated from Pearson424 Forum using Mail2Forum
-
You could hinge mount the seat it so that it flipped up and also hinge the leg so it folds up too, then it would be out of the way when you needed into the locker.
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick<.. snip>
Post generated from Pearson424 Forum using Mail2Forum
-
On 10/20/08 10:03 PM, Patrick Walters wrote :
Quote:You could hinge mount the seat it so that it flipped up and also hinge the leg so it folds up too, then it would be out of the way when you needed into the locker.-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>
Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick <http://www.shipsrecord.com/blogs/patrick>
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
Viewing 2 reply threads
- You must be logged in to reply to this topic.