- This topic has 2 replies, 3 voices, and was last updated 17 years, 2 months ago by
.
-
Posts
-
-
John,
Yes, that looks pretty much like the strainer plate I put on. I have no idea of it’s rated water flow compared to a 1″ thru-hull, but it all seems to work fine on my boat. Plenty of water flowing through the engine.
Tor
~~~~~~~~~~~~~~~~~~~~~~~
Silver Heels, P-424 #17
http://www.SilverHeels.us
~~~~~~~~~~~~~~~~~~Quote:
Original Message
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
-
All this discussion of strainers reminded me I had not cleared my strainer basket since the Bahamas (it was always clean in the Bahamas). I was reminded of that task, but I still did nothing. During last night the A/C and the frig shut down because of low water flow, so this morning I opened the strainer – not without some trepidation I might add, give Linus' experience. His boat is about 20 miles from my berth. I partially opened the cover on the strainer and listened for anything splashing around in there. When I removed the cover I could see that no eels could get into that mess.
I guess this task will go back on the monthly to do list.On Tue, Aug 4, 2009 at 11:31 AM, Linus Martinez < ([email][/email])> wrote:
Quote:Hey that would cut down on eels that jump out of the strainer when you open it up. I might have to get one.
Linus<.. snip>
Post generated from Pearson424 Forum using Mail2Forum
-
- You must be logged in to reply to this topic.