RigRite Parts (Boom End Cap, Mizzen and Main Outhauls)

[madsailor]

I suspect, Pat, that you could have one made at a shop for less money. Not
the end cap, but the slide. The end cap if you didn’t care if it was
machined or cast. Really.

Bob

On Mon, May 3, 2010 at 4:24 PM, Patrick “Peaboy” Walters <
> wrote:

You may remember I broke the lug off my main boom end cap for the tack of
the sail. I was going to Magruber something, but found I could get one from
Rig Rite for about $300.

http://www.rigrite.com/Spars/Spartan_Spars/cd4_boom.html
*D-4 Gooseneck Assembly, Special – Pearson: SP-180PY:*
Special Gooseneck End designed especially for some larger Pearson Yachts,
is
identical to *SP-180*, above, but with lug for attachment of 5/16″ Tack
shackle. Used with a variety of *Gooseneck
Toggles<http://www.rigrite.com/Spars/SparParts/Gooseneck_toggles.html>
*, up to 15/16″ wide, that do not incorporate a Tack attachment. Heavy-duty
aluminum casting has black epoxy coating and includes 1/2″ horizontal pin
and nylon bearing washers.

I was also looking for replacement outhaul sliders for both the main and
the
mizzen. They didn’t have the mizzen and the main was $399 (yikes!) so I
didn’t order that. These are the two parts I identified. Has anyone else
replaced their outhaul sliders with a more affordable part?

http://www.rigrite.com/Spars/SparParts/Outhaul_slides_integral.html
*Main*
*Outhaul Slide Ass’y w/ Sheave for 3/4″ Internal Track: Sch
95-54X:*Heavy-duty
Outhaul Slide Assembly features channel with 2-position clew attachment
using 5/16″ clevis pin, and 1 1/16″ diameter SS Sheave for a 2 part
purchase
using up to a 5/32″ wire pennant. When additional purchase is not desired,
sheave can be used for direct attachment of outhaul pennant. Slide body is
cast SS with welded sheave cage and 9/16″ ID channel for Clew. Slide is 3
3/4″ long x 3/4″ wide, and 2 5/8″ (maximum) high. For 3550, 3756 and other
Boom sections with 3/4″ Internal Flat Track.

[image: Sch 95-54X]
*Mizzen*

Outhaul Slide Assembly w/ Sheave for 1/2″ Boltrope Groove: Sch

95-56X:Heavy-duty

Outhaul Slide Assembly features channel with 2-position clew attachment
using 5/16″ clevis pin, and 1 1/16″ diameter delrin Sheave for a 2 part
purchase using up to a 3/8″ rope pennant. Slide body is welded SS with
welded sheave cage, a 9/16″ ID channel for Clew and a heavy delrin liner

to

minimize friction. Slide is 3 3/4″ long x 3/4″ wide, and 2 5/8″ (maximum)
high. For Boom sections with a 1/2″ or larger Boltrope groove.

[image: Sch 95-56X]

Thanks,
-p

—
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com
_______________________________________________
maillist mailing list

https://pearson424.org/mailman/listinfo/maillist_pearson424.org

—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
Follow me at: http://www.tinyurl.com/WhereIsBobFine
_______________________________________________
maillist mailing list

https://pearson424.org/mailman/listinfo/maillist_pearson424.org

Post generated from Pearson424 Forum using Mail2Forum

[Author]

Posts