- This topic has 7 replies, 7 voices, and was last updated 17 years, 8 months ago by
.
-
Posts
-
-
3/4″ balsa cored deck for those interested.
http://twitpic.com/1lcswWhew, I was VERY nervous drilling that hole. I need to go each lunch and relax. 🙂
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrickPost generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick! -
Good job, Patrick.
A lot better than I didJohn
On Fri, Feb 20, 2009 at 3:30 PM, Patrick Walters < ([email][/email])> wrote:
3/4″ balsa cored deck for those interested.
http://twitpic.com/1lcswWhew, I was VERY nervous drilling that hole. I need to go each lunch and relax. 🙂
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick's Sailing Blog | http://www.shipsrecord.com/blogs/patrick—
Regards,
John Stevenson
http://www.svsarah.comPost generated from Pearson424 Forum using Mail2Forum
-
-
Holly shit! Why did you put it there! That will leak like crazy no matter what you do! (…just kidding).
Patrick Walters wrote:
P { MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px } 3/4″ balsa cored deck for those interested.
http://twitpic.com/1lcswWhew, I was VERY nervous drilling that hole. I need to go each lunch and relax. 🙂
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrickPost generated from Pearson424 Forum using Mail2Forum
-
Pat,
You need to move that hole 4″ farther aft!
🙂
~~~~~~~~~~~~~~~~~~~~~~~
Silver Heels, P-424 #17
http://www.SilverHeels.us
~~~~~~~~~~~~~~~~~~Quote:
Original Message
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
-
OK, I now know you and Tor and are the muck rakers… and I thought it was going to be me. 🙂
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick’s Sailing Blog | http://www.shipsrecord.com/blogs/patrick<.. snip>
Post generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick! -
Why in God's name would you drill a hole there? I mean, what is the hole for? If you could drill a hole anywhere, why there? It seems like an unlikely place for a hole. Was it random? Did you think, “I need to drill a hole… This seems like a likely spot. Where is that darn drill. Ah, here we go. Look out world here comes a hole!”?
Or, I may not have been paying attention. Or I've had too much to drink, which is totally possible.
BOb
On Fri, Feb 20, 2009 at 3:30 PM, Patrick Walters < ([email][/email])> wrote:
3/4″ balsa cored deck for those interested.
http://twitpic.com/1lcswWhew, I was VERY nervous drilling that hole. I need to go each lunch and relax. 🙂
-p
s/v Deep Playa | Pearson 424 #152 | http://www.DeepPlaya.com
Patrick's Sailing Blog | http://www.shipsrecord.com/blogs/patrick—
Bob Fine
s/v Pelican
Hull #8Post generated from Pearson424 Forum using Mail2Forum
-
-
- You must be logged in to reply to this topic.