Traveler Riser measurement

[unabated]

Anyone out there who on their boat?
I need a quick measurement of the riser for the
traveler. At the outboard end of the riser, where it
transitions up.
________
| |
| | Dim “A”
| |_________________this is really an angle up
but |
can’t draw it here
|
|

thanks
alan

---

To unsubscribe, e-mail:
For additional commands, e-mail:

Post generated from Pearson424 Forum using Mail2Forum

[Paul Lefebvre]

Hi Alan:

I measure it at just over 5 1/2 ” from the top of the flange on the bottom
(5 5/8″ from the deck).

Let me know if you need any other measurements.

Paul

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Paul

Ooops…. need from top of riser to where the old
track is mounted. I think it’s 2 inches but need to
confirm for Garhauer.
thanks
alan
— Paul Lefebvre <> wrote:

Quote:

Hi Alan:

I measure it at just over 5 1/2 ” from the top of
the flange on the bottom
(5 5/8″ from the deck).

Let me know if you need any other measurements.

Paul

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Paul Lefebvre]

Your 2″ guess was pretty close. I measure it at 1 3/4″ to the highest point.

Paul

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Thank you…. that confirms it.
I would have had to drive the 40 miles to measure
that…. thanks again
alan
— Paul Lefebvre <> wrote:

Quote:

Your 2″ guess was pretty close. I measure it at 1
3/4″ to the highest point.

Paul

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Author]

Posts