Walter

[Adam Silverstein]

I am in need of a dipstick. What is the fill level (ballpark) for gear
oil in the v-drive? Do most people use 80 or 30?

-Adam Silverstein
(via iPhone)

---

To unsubscribe, e-mail:
For additional commands, e-mail:

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

sae 30 here

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Anonymous]

30 here too
— Adam MacNeill <> wrote:

Quote:

sae 30 here> <.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[RichCarter]

I’ve always used SAE-30 oil. This is the same stuff I used to put in my engine, but my new engine wants blended oil. In any case, 30 weight oil has always worked for me.
—
Rich Carter

Post generated from Pearson424 Forum using Mail2Forum

[RLeeds]

30 for me.

Rodd Leeds

---

Original Message

---

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

You mean there’s oil in that thing?

a
— Rodd Leeds <> wrote:

Quote:

30 for me.

Rodd Leeds

---

Original Message

---

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[quent]

Alan-
The length of the Walter RV-20 oil dipstick from the shoulder that fits against the top cover, to the “H” mark is about 9″. To the “L” mark is about 9-3/4″.
Quent Kinderman
Clairebuoyant #132

[Anonymous]

I use 30 SAE. One time, in the Rio Dulce, the seal started leaking., I then used 90w oil to minimize the leaking. It almost stopped with the heavy oil. I had the unit rebuilt when I returned to the US, but it cost so much in labor I would have been the same amount of money to buy a new one, if I could have made out the all but oblitered model number.

Norris Larson
Easy Reach, ketch, hull #204.

— On Wed, 5/7/08, <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Author]

Posts