- This topic has 9 replies, 5 voices, and was last updated 16 years, 12 months ago by
.
-
Posts
-
-
So, I’m not exactly sure what I have going on here. Luckily (?) I have a shot after my grounding clearly showing all the layers down to the gel coat.
http://www.flickr.com/photos/deepplaya/4058996362/
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.comPost generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick! -
-
Do you like the color now? Or do you like burgundy? Go with what your heart says. I'm always tempted to go with shark white or better yet, copper color. But that's just me. What color is your boottop stripe? Cove stripe? If it's burgundy, then put a white line below your boottop of 3/4″ to 1″ and then paint the bottom burgundy.
How's that for an answer?
Bob
On Fri, Oct 30, 2009 at 2:32 PM, Patrick Walters < ([email][/email])> wrote:
So, I'm not exactly sure what I have going on here. Luckily (?) I have a shot after my grounding clearly showing all the layers down to the gel coat.
http://www.flickr.com/photos/deepplaya/4058996362/
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
Follow me at: http://www.tinyurl.com/WhereIsBobFinePost generated from Pearson424 Forum using Mail2Forum
-
I think I’ll go with Burgundy. I have a darkred (probably was burgundy at soem point) boot stripe that we can match up when we paint that too.
I do like the idea of going with Black and seeing if we can’t film some “adult” whale movies. 😉 HA!-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.comFrom: “Robert Fine” <>
Sent: Friday, October 30, 2009 11:50 AM
To:
Subject: Re: What color is my bottom?Do you like the color now? Or do you like burgundy? Go with what your heart says. I’m always tempted to go with shark white or better yet, copper color. But that’s just me. What color is your boottop stripe? Cove stripe? If it’s burgundy, then put a white line below your boottop of 3/4″ to 1″ and then paint the bottom burgundy.
How’s that for an answer?
Bob
On Fri, Oct 30, 2009 at 2:32 PM, Patrick Walters < ([email][/email])> wrote:
So, I’m not exactly sure what I have going on here. Luckily (?) I have a shot after my grounding clearly showing all the layers down to the gel coat.
http://www.flickr.com/photos/deepplaya/4058996362/
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com—
Bob Fine
s/v Pelican
Pearson 424 Hull #8
http://thesailinglife.blogspot.com
Follow me at: http://www.tinyurl.com/WhereIsBobFinePost generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick! -
-
I try to choose and odd color so if I drink too much and fall over board I can look up and see which boat to swim to. Current economic situation has changed that, now I choose what’s on sale. I got Micron Extra for 159.00 of Ebay so blue it is.
Linus
<.. snip>
Post generated from Pearson424 Forum using Mail2Forum
-
How many coats are you planning? Previous owner of HiFlite painted blue
over red. A quick dive will tell you where you need additional paint.
If you see red you have worn off the top coat in that area. Other then
that I opt for whatever is on sale.Patrick Walters wrote:
So, I’m not exactly sure what I have going on here. Luckily (?) I
have a shot after my grounding clearly showing all the layers down to
the gel coat.http://www.flickr.com/photos/deepplaya/4058996362/
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com
<http://www.deepplaya.com/>
To unsubscribe, e-mail:
For additional commands, e-mail:Post generated from Pearson424 Forum using Mail2Forum
-
-
I like to completely change the color, so I can tell when it’s wearing through.
On 10/30/09 12:06 PM, “Patrick Walters” <> wrote:
I think I’ll go with Burgundy. I have a darkred (probably was burgundy at soem point) boot stripe that we can match up when we paint that too.
I do like the idea of going with Black and seeing if we can’t film some “adult” whale movies. 😉 HA!-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>From: “Robert Fine” <>
Sent: Friday, October 30, 2009 11:50 AM
To:
Subject: Re: What color is my bottom?Do you like the color now? Or do you like burgundy? Go with what your heart says. I’m always tempted to go with shark white or better yet, copper color. But that’s just me. What color is your boottop stripe? Cove stripe? If it’s burgundy, then put a white line below your boottop of 3/4″ to 1″ and then paint the bottom burgundy.
How’s that for an answer?
Bob
On Fri, Oct 30, 2009 at 2:32 PM, Patrick Walters <> wrote:
So, I’m not exactly sure what I have going on here. Luckily (?) I have a shot after my grounding clearly showing all the layers down to the gel coat.
http://www.flickr.com/photos/deepplaya/4058996362/ <http://www.flickr.com/photos/deepplaya/4058996362/>
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>
Post generated from Pearson424 Forum using Mail2Forum
-
Little tips and tricks like that are priceless. Thanks!
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.comFrom: “Aaron Lynch” <>
Sent: Saturday, October 31, 2009 1:31 PM
To:
Subject: Re: What color is my bottom?I like to completely change the color, so I can tell when it’s wearing through.
On 10/30/09 12:06 PM, “Patrick Walters” <> wrote:
I think I’ll go with Burgundy. I have a darkred (probably was burgundy at soem point) boot stripe that we can match up when we paint that too.
I do like the idea of going with Black and seeing if we can’t film some “adult” whale movies. 😉 HA!-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>From: “Robert Fine” <>
Sent: Friday, October 30, 2009 11:50 AM
To:
Subject: Re: What color is my bottom?Do you like the color now? Or do you like burgundy? Go with what your heart says. I’m always tempted to go with shark white or better yet, copper color. But that’s just me. What color is your boottop stripe? Cove stripe? If it’s burgundy, then put a white line below your boottop of 3/4″ to 1″ and then paint the bottom burgundy.
How’s that for an answer?
Bob
On Fri, Oct 30, 2009 at 2:32 PM, Patrick Walters <> wrote:
So, I’m not exactly sure what I have going on here. Luckily (?) I have a shot after my grounding clearly showing all the layers down to the gel coat.
http://www.flickr.com/photos/deepplaya/4058996362/ <http://www.flickr.com/photos/deepplaya/4058996362/>
So should I go with a Burgundy when I repaint?
Paint color card: http://www.defender.com/ftp/pettit-color-card.pdf-p
—-
s/v Deep Playa | Pearson 424 Hull #152 | http://www.DeepPlaya.com <http://www.deepplaya.com/>
Post generated from Pearson424 Forum using Mail2Forum
Owners no more...
Thanks Dawn and Patrick!
-
- You must be logged in to reply to this topic.