Forum Replies Created
-
Posts
-
Chuck! You're a maniac! Good for you!
Bob
On Sun, Mar 23, 2008 at 7:58 PM, Don Barber < ([email][/email])> wrote:
Quote:Chuck that was awsome !!!!!Don
Original Message —-
<.. snip>Post generated from Pearson424 Forum using Mail2Forum
I was wondering about that, too. I'm free most weekends, but not last two in August, first in September. It's only 13 hours from Stamford, CT.
Bob
On Sat, Mar 22, 2008 at 2:14 PM, Adam Silverstein < ([email][/email])> wrote:
So after all that blather, nada? I'll post some pictures from Naragansett Bay.
Adam Silverstein
s/v Phantom Corsair—
Bob Fine
Fine Software LLC
Your data on the web your way. No kiddingPost generated from Pearson424 Forum using Mail2Forum
Hi Tor,
Wow! I mean WOW! Where are mine? (Didn't get private mail)
Listen – the angle of the foot on the outboard leg is correct, just 1″ short?
Make a pad out of Ipe. Hard as a rock, will outlast teak.
Man, thanks!
Bob
On Thu, Mar 20, 2008 at 10:55 AM, Silver Heels < ([email][/email])> wrote:
Attention Pulpiteers,
I have just emailed everyone (I hope!) privately who has expressed interest in ordering mast pulpits. The email contains
an update on the prototype rails I just received and tried on for size. I sent just one email to everyone at once via
Bcc, so if you have not received that correspondence please check your spam folder, trash bin, etc. for an email titled,
“Mast Pulpits News & Photos,” with 4 JPEG photos attached. If you cannot find or retrieve the info, email me at
() and I'll send it to you again individually.Tor
Silver Heels, P-424 #17
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.21.7/1335 – Release Date: 3/19/2008 9:54 AM
To unsubscribe, e-mail: ()
For additional commands, e-mail: ()—
Bob Fine
Fine Software LLC
Your data on the web your way. No kiddingPost generated from Pearson424 Forum using Mail2Forum
If you're going to upgrade your VHF, the Standard Horizon GX5500S has all that and more. I just installed one.
On Tue, Mar 18, 2008 at 12:36 AM, Aaron Lynch < ([email][/email])> wrote:
I have a uniden UM 525 VHF radio, it can play several different patterns over the loud hailer. I presume most radios (or dedicated hailers) have a similar function.
It workd real good too until the Genoa wiped the horn off the mast before I had installed the radar. Learned that lesson quick, but a little late 🙂
On 3/17/08 6:54 PM, Lee Yonkers wrote :
Does anyone know of a commercially available automatic horn that meets CG requirements for operations in fog? I have heard of systems that reportedly work through the hailer option of a VHF radio.
Thanks
Lee Y
#43Never miss a thing. Make Yahoo your homepage. <http://us.rd.yahoo.com/evt=51438/*http://www.yahoo.com/r/hs>
—
Bob Fine
Fine Software LLC
Your data on the web your way. No kiddingPost generated from Pearson424 Forum using Mail2Forum
Pompanette is the distributor of Bomar products. I know because I bought stuff from them.
Bob
On Sat, Mar 15, 2008 at 7:16 PM, Jim Ashworth < ([email][/email])> wrote:
Check out http://www.pompanette.com Jim Ashworth
On Sat, Mar 8, 2008 at 4:17 PM, adam silverstein < ([email][/email])> wrote:
Por favor, what are the stock hatches? I was under the impression they
might be Bomar 100 series. I need to replace gaskets and several
broken armatures, so any tips are appreciated.-Adam Silverstein
(via iPhone)
To unsubscribe, e-mail: ()
For additional commands, e-mail: ()—
Bob Fine
Fine Software LLC
Your data on the web your way. No kiddingPost generated from Pearson424 Forum using Mail2Forum
Hi Jack,
Someone else in the list got theirs replaced… Let me see if I can find out who – it's the mast foot.
Bob
On Sat, Mar 15, 2008 at 9:52 AM, Deaton Yacht Sales < ([email][/email])> wrote:
Quote:Hi Robert: thanks for getting me involved. Mike must have misundersood me. I'm actually looking for a mast shoe as mine is very badly corroded. I'm getting reay to pull the “stick” and replace it. Metalmast used to make one but I understand they are no longer in business. Have a great week end.
Best Regards/ Jack Coulter CPYB<.. snip>
Post generated from Pearson424 Forum using Mail2Forum
Hi Mike,
I can't imagine they'd be unhappy to hear from Jack. Here's the info from Tor:
Greetings Pulpiteers,
OK, we’re all set to order our mast pulpits now. The fabricator, Railmakers Inc, needs the following information from
each of you who wish to participate in the group-rate order:– Your Name
– Shipping Address
– Day Phone Number
– Email Address
– MasterCard of Visa (number, expiration date, 3-digit security number, billing address zip code)– Also, you MUST specify to Railmakers directly whether or not you want the mid-level stepping bar option for an
additional $90.Please call, email or fax your information directly to Dave (David Hawley, Manager) at Railmakers between today,
Wednesday the 27th, and this Friday the 29th. Remember they’re on Pacific Standard Time, 3 hours earlier than East Coast
time:Railmakers, Inc.
David Hawley, Manager
864 West 18th Street
Costa Mesa, CA 92627Phone: (949)642-6506
Fax : (949)642-8066
Email: ()
URL : http://www.railmakers.comRailmakers is going to build all of the mast pulpits at the same time. Once they get payment info from all of us, they
predict it will be one to two weeks for production, plus two to three days for polishing and packaging, plus shipping
time (UPS Ground). So for the production run, from time of order to parts in hand figure three to four weeks. I’ve asked
Dave to send the first two pair off the line to Bob Fine and me so we can verify that everything is as it should be.
That way, if there is any little glitch, we can get back to Railmakers about it (hopefully) before they ship the rest.Here, again, is what you can expect to pay:
$445.00 – per pair of mast pulpits, as per attached FINAL FINAL (mod-10) plan drawings
$ 90.00 – optional stepping Bar
$ 8.50 – packaging
$100.00 – ESTIMATED shipping cost, UPS GroundThanks to all of you for your input and your patience.
Reef early,
Tor
Silver Heels, P-424 #17
()
http://www.SilverHeels.us
On Fri, Mar 14, 2008 at 4:12 PM, Mike Bogie < ([email][/email])> wrote:Hey Guys
Can you believe it I'm writing about mast pitts, go figure.
A friend of mine Jack just bought hull #184 I'm #183 anyway in a conversation with him I mentioned the mast pitts ya'll are buying. He would be interested if it is not too late
He also needs to be put on our mail list. His name and address listed below.
Thanks
Mike Bogie
#183.—
Thank You,
Mike BogieBogie Hardware, Inc.
800-278-3309 or Fax 800-590-9659
() or ()
http://www.bogiehardware.com—
Bob Fine
Fine Software LLC
Your data on the web your way. No kiddingPost generated from Pearson424 Forum using Mail2Forum
