[unabated]

Once you’ve drilled a few ,it gets real easy…… too easy!
alan

— On Fri, 2/20/09, John Stevenson <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

The reason I asked about the pump was because on your electrical (generator.bmp) it shows a water pump tied to your fuel pump.
alan

— On Thu, 2/19/09, Pete Dubler <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I am trying to contact the Phasor dealer that shows up when I GOOGLE them but the contact address is NG. Have you a name that I can contact or an E-Mail address?
alan

— On Thu, 2/19/09, quent <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Pete,
Thanks for the info.
So you using the RG30 for the Freshwater pump, belted to the engine and an electric pump for seawater?
How much $$ was the Phasor Heat exchanger? Do you have a URL for them?
In my afr lazerette, they were some floor boards with some flimsy stringers to attach them to. I was planning on beefing up the stringers and mounting the Kubota acoss them. I figured 150 lbs would not matter too much back there. Although in the port sail locker (lazerette) would offset the weight of the batteries in the starboard side…..but I have a nice shelf in there. Maybe under it?
alan

— On Wed, 2/18/09, Pete Dubler <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Rodd,
What plotter did you buy and where are you going to mount it?
alan

— On Fri, 2/13/09, Rodd Leeds <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Tor,
On Jack Tylers website “WHOOSH” – access through John Stevensons site – has drawings of the foredeck bracket and the mast tang. I used both of those on my boat for the Solent stay installation. The bracket that you have designed is essentially the one that Jack has. Easy to weld up and easy to install. (although double check the “depth” of your anchor locker)
alan

— On Tue, 1/27/09, Silver Heels <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I believe I have 5 or 6 of the gaskets – new…. in the box. I got the gaskets and found it too difficult to get them on…. so I purchased the new NFM ports instead…. I know…… I know but I wanted new ports anyhow and that just pushed me over the edge (GF actually bought them for me…….what can I say).
Lets me see if I can find them and go from there.
a

— On Mon, 1/26/09, Robert Fine <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

What size NFM ports did you buy to replace the 4 x 17.5?
alan

— On Mon, 1/26/09, Patrick Walters <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I am upgrading the electronics on UNABATED and I am offering for sale the SSB radio. It’s a SGC 2000 that as far as I can tell is about 10 yrs old.
According to the previous owner, he didn’t know too much about how to operate it so I am assumming that is was lightly used before I bought the boat. I never used it except to listen to some HAM chatter now and then
(I don’t have a HAM license) and I did contact someone in Texas once and a few boats on the ICW so I know it works ( I am in the Great Lakes).
I am thinking 800.00 US plus shipping from Western NY should take it.
Pictures upon request
alan

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I like that idea, but….. I think there is too much weight there now with just 4 125 Trojans and a starting battery…. slight list to starboard….. I think lower and center is better, just can’t think of a place…… I have wet cells…
alan

— On Wed, 1/21/09, Lee Yonkers <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I get all my teak from
http://www.buckwoodcraft.com/
good prices I think, fast delivery and easy to work with

Alan
— On Fri, 1/16/09, Rodd Leeds <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

I went past that….. got the get…..

— On Mon, 1/12/09, Thatcher Stone <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

ok cool 3 then…

— On Mon, 1/12/09, Rodd Leeds <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Adam, I think I am the only one that got the ketubah joke…….
alan

— On Mon, 1/12/09, adam silverstein <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[unabated]

Yeah list em here….
What autopilot parts?

a

— On Sun, 12/28/08, Robert Fine <> wrote:

Quote:

<.. snip>

Post generated from Pearson424 Forum using Mail2Forum

[Author]

Posts